Author Topic: 1988 "20B"/13b... TII  (Read 24632 times)

0 Members and 5 Guests are viewing this topic.

Offline murz

  • Hero Member
  • *****
  • Posts: 622
  • Karma: 7
  • Gender: Male
Re: 1988 20B TII
« Reply #90 on: January 12, 2018, 12:58:36 PM »
You know i think this will run really good, if we can make the bridge port closes at 60 ABDC. From what I've seen, people that usually do this either bridge the aux ports above the aux ports, or don't bother to bridge them at all. I think you might be on to something.

I've got an extra housing or two, but they're questionable.
« Last Edit: January 12, 2018, 01:06:01 PM by murz »
1986 AS GXL Turbo swapped
1993 VR R1

Offline ITSWILL

  • Rotary God!!
  • ******
  • Posts: I am a geek!!
  • Karma: 9
  • Gender: Male
Re: 1988 20B TII
« Reply #91 on: January 12, 2018, 03:11:09 PM »
I forgot to mention I got these in last week.

You are not allowed to view links. Register or Login

They are 2.5" diameter by 2 inch tall aluminum round stock.  I paid $15 for them on ebay.
I'm going to drill a 3/8 hole in the center of them and use them for solid engine mounts. 
86 Base LS1 w/100 shot
88 TII 20B T70 turbo

Offline fidelity101

  • Sr. Member
  • ****
  • Posts: 462
  • Karma: 4
Re: 1988 "20B"/13b... TII
« Reply #92 on: January 14, 2018, 08:05:28 PM »
I did that before, worked out great  - you can just order up high quality hardware from mcmaster carr and call it good.

Offline ITSWILL

  • Rotary God!!
  • ******
  • Posts: I am a geek!!
  • Karma: 9
  • Gender: Male
Re: 1988 "20B"/13b... TII
« Reply #93 on: March 17, 2018, 07:03:09 PM »
Finally got to do some work on the engine in the past few days.

I cut the little fins out of the exhaust ports with a sawzall
You are not allowed to view links. Register or Login

And then I ground it all down to be just like a turbo insert
You are not allowed to view links. Register or Login

All the housings and irons cleaned up, just need to be washed and then powder coated
You are not allowed to view links. Register or Login

Made an EGR block off
You are not allowed to view links. Register or Login

The water pump inlet was corroded to shit
You are not allowed to view links. Register or Login

After Filling the holes with the TIG and filing
You are not allowed to view links. Register or Login

« Last Edit: March 17, 2018, 07:11:45 PM by ITSWILL »
86 Base LS1 w/100 shot
88 TII 20B T70 turbo

Offline ITSWILL

  • Rotary God!!
  • ******
  • Posts: I am a geek!!
  • Karma: 9
  • Gender: Male
Re: 1988 "20B"/13b... TII
« Reply #94 on: March 17, 2018, 07:41:36 PM »
Also, managed to get the son on a bitching side seals out with a ton of prying. Now I have to figure out what pats I'm going to need to replace.

Also, have been doing some research about the impact of compression ratio on power output and have found that the general rule of thumb is 4% max power increase per 1 compression ratio.

With that said going from a 9.4 CR to 9.7 CR rotor would yield a whopping 3 HP max.  I guess I'll be sticking with the 9.4s I have.
86 Base LS1 w/100 shot
88 TII 20B T70 turbo

Offline murz

  • Hero Member
  • *****
  • Posts: 622
  • Karma: 7
  • Gender: Male
Re: 1988 "20B"/13b... TII
« Reply #95 on: March 18, 2018, 07:54:16 AM »
Those parts cleaned up nicely, have a color scheme planned out? Well done with that water pump, that was really corroded.
1986 AS GXL Turbo swapped
1993 VR R1

Offline ITSWILL

  • Rotary God!!
  • ******
  • Posts: I am a geek!!
  • Karma: 9
  • Gender: Male
Re: 1988 "20B"/13b... TII
« Reply #96 on: March 19, 2018, 03:45:48 PM »
I'll probably paint it black and chrome like I did the RX-8 engine.  I need to measure the apex seals up and see if they are still good and then gather a few other parts and I should finally be ready to build this thing.
86 Base LS1 w/100 shot
88 TII 20B T70 turbo

Offline ITSWILL

  • Rotary God!!
  • ******
  • Posts: I am a geek!!
  • Karma: 9
  • Gender: Male
Re: 1988 "20B"/13b... TII
« Reply #97 on: March 26, 2018, 07:04:28 PM »
Marcus and I went and borrowed porting templates from Kevin this weekend.  We finished threes street port on a scrap iron and started a sweet cheese port but got confused about the other holes in the template...

You are not allowed to view links. Register or Login
86 Base LS1 w/100 shot
88 TII 20B T70 turbo

Offline ITSWILL

  • Rotary God!!
  • ******
  • Posts: I am a geek!!
  • Karma: 9
  • Gender: Male
Re: 1988 "20B"/13b... TII
« Reply #98 on: March 26, 2018, 07:05:37 PM »
You are not allowed to view links. Register or Login
<a target='_blank' href='You are not allowed to view links. Register or Login photo upload[/url]
86 Base LS1 w/100 shot
88 TII 20B T70 turbo

Offline murz

  • Hero Member
  • *****
  • Posts: 622
  • Karma: 7
  • Gender: Male
Re: 1988 "20B"/13b... TII
« Reply #99 on: March 27, 2018, 06:21:14 AM »
It's the "magic port", that combined with cheese ports, = maximum power.
1986 AS GXL Turbo swapped
1993 VR R1

Offline ITSWILL

  • Rotary God!!
  • ******
  • Posts: I am a geek!!
  • Karma: 9
  • Gender: Male
Re: 1988 "20B"/13b... TII
« Reply #100 on: March 28, 2018, 05:58:16 AM »
I picked up one of the Pro Jay knock off intake manifolds from JW Performance last night. Supposedly a better performer than the Racing beat manifold.  I'll let you guys know what I think of it when it comes in.

This will keep my options open for a carburetor or fuel injection since it has a standard Holley 4150 flange.

« Last Edit: March 28, 2018, 06:08:48 AM by ITSWILL »
86 Base LS1 w/100 shot
88 TII 20B T70 turbo

Offline murz

  • Hero Member
  • *****
  • Posts: 622
  • Karma: 7
  • Gender: Male
Re: 1988 "20B"/13b... TII
« Reply #101 on: March 28, 2018, 06:34:48 AM »
Oh nice! Is it a 6 port variant? Or will you have to modify the ports to make it a 6 port manifold? That's the type of design I was thinking of too, leaves a lot of room for options.
1986 AS GXL Turbo swapped
1993 VR R1

Offline ITSWILL

  • Rotary God!!
  • ******
  • Posts: I am a geek!!
  • Karma: 9
  • Gender: Male
Re: 1988 "20B"/13b... TII
« Reply #102 on: March 28, 2018, 07:17:43 AM »
it is for a 6 port however the other ports are not separated in the intake manifold.
86 Base LS1 w/100 shot
88 TII 20B T70 turbo

Offline fidelity101

  • Sr. Member
  • ****
  • Posts: 462
  • Karma: 4
Re: 1988 "20B"/13b... TII
« Reply #103 on: March 29, 2018, 10:26:07 AM »
You are not allowed to view links. Register or Login
It's the "magic port", that combined with cheese ports, = maximum power.

thats the direct injection port :)

Offline ITSWILL

  • Rotary God!!
  • ******
  • Posts: I am a geek!!
  • Karma: 9
  • Gender: Male
Re: 1988 "20B"/13b... TII
« Reply #104 on: March 29, 2018, 05:13:27 PM »
If I go for a 200 shot of nitrous, do you guys think I should have studs in it?
86 Base LS1 w/100 shot
88 TII 20B T70 turbo